How to configure network in Tornado OS?

Here is the Desktop of Tornado os.
In Taskbar you can see the Network Icon.
Here cable is attached but network is not configured.
Screen-1



Right click on Network icon
Check mark the Enable Networking option.
Click on Edit Connections.
Screen-2




Now, you have Network Connections dialogue box.
Select Auto etho option and click on edit button.
Screen-3



You get the Editing Auto eth0  dialogue box.
Screen-4.




Click on IPv4 Settings.
Screen-5




Click on down Up-Down arrow button.
You get the following screens.
Screen-6




From here you can set through DHCP and Also set the manual network.
Select Manual Options.
Now , in Addresses you  can assign the
 
IP Address
Subnet mask
Gateway
Dns Server IP:
To add IP address double click on Address box.You can able to add IP.
Screen-7




You can see we have given following Network Configuration to this client.
Screen-8






Click on Apply Button.
Now,check the connectivity.
Go to System Manger and click on Ping icon.
Screen-9




As you click on Ping button,you will get the following dialogue box.
Enter server IP and Check the connectivity with server.
Ping dialouge box will open.
Enter the server ip.
Click on Ping Button.
Screen-10.


If you get the ping reply, network configuration is correct.