• If you want to know that your Printer Model will Supports in Tiguin or not?
  • Then please contact to our Support, they will guide you for your Printer Model will supports or not.


Main Menu → System Tools → Printing



“Add button” to add new printer

Click on

“Network Printer” under Devices


“Find Network Printer”

On the Right Side

Provide IP address of Host system
(where your printer is connected) in Host

Click on “Find button”

It will start searching for printer on provided IP address

After Searching for Printer on Host

It will display information about


Click on “Forward Button”

If you have set authentication on your network shared printer then

Click on Set authentication

Enter Username and Password

Click on Verify

After virification click on Apply.


Make of Printer (eg. HP)

Click on “Forward Button”


Model of Printer
(eg. Laserjet M1005 MFP)

Click on “Forward Button”

No need to change any settings

Click on “Apply Button”

Your Printer is Installed

Print a Test page


Click on Cancel Button to proceed

Now you can see

Installed Printer

Eg. HP-LaserJet-M1005-MFP-2

is the newly installed network printer connected on other host in network

This printer will be available in Tally

Note : Please restart Tally for Printer List to refresh in Tally Print Dialog